SonotaCo.JP
SonotaCo Network Japan Forum
|
 |
|
|
| 前のトピックを表示 :: 次のトピックを表示 |
| 投稿者 |
メッセージ |
Vesper
登録日: 2026.08.29 記事: 1
|
日時: Mon Sep 07, 2026 7:50 pm 記事の件名: Issue with UFOCaptureIP |
|
|
Hello,
My name is Pierre and I'm an amateur astronomer from France.
I'm currently testing UFOCaptureIP 512 (I tested also v.511). I encounter a problem. First of all my configuration is as follow :
- camera Corona Borealis Fireball IMX 662 : 1920*1080, 60 fps day, 25 fps night.
2Mp Imx662 IP Camera 60Fps Starlight Meteor Detection Night VisionGMN Rtsp Ip66 Outdoor Astrophotography Camera;
- Windows 11 PC Ryzen 5-7430U, 16Go /512Go
Both UFOCapture 511 or 512 run smoothly. The problem is :
UFOCaptureIP stops after a detection has been made and doesn’t resume (neither the detection nor even the “preview,” which remains frozen). To resume detection, I have to click “Preview” again and then “Detect" again. Is this normal? Is this a limitation due to the fact that it’s the demo version, and will it be removed once the license is purchased?
Also, I’ve carried out some very thorough tests and I now believe I can say with certainty that neither the camera nor the RTSP stream is at fault. Unfortunately, it seems that UFOCaptureIP is the problem.
In summary:
1- UFOCaptureIP receives the stream;
2- it detects an event;
3- it records correctly;
4- the recorded video file can be viewed in the “Preview” section;
5- the capture engine stops silently;
6- the preview freezes;
7- the CPU usage of “UFOIP” drops to 0 per cent.
This points to UFOCaptureIP itself, more specifically its handling of the transition:
“end of capture → closing the file → resuming stream analysis”.
After that and among other things, I carried out the following experiment: using an RTSP proxy (MediaMTX) between the camera and UFOCaptureIP. This allowed me to completely decouple the camera from the software and see whether the problem stems from the way UFOCaptureIP handles the RTSP connection after a detection.
The result was that the problem stays the same.
Many thanks in advance for any help.
Clear skies,
Pierre
|
|
| トップに戻る |
|
 |
SonotaCo Site Admin
登録日: 2004.08.07 記事: 13699 所在地: 139.67E 35.65N
|
日時: Mon Nov 16, 2026 1:46 pm 記事の件名: Re: Issue with UFOCaptureIP |
|
|
| Vesper wrote: | | UFOCaptureIP stops after a detection has been made and doesn’t resume (neither the detection nor even the “preview,” which remains frozen). To resume detection, I have to click “Preview” again and then “Detect" again. Is this normal? |
My apologies for the significant delay in responding; I only just noticed your question.
It is not normal to fail resuming after a capture.
If this issue occurs while the "Use RTSP" setting under "Source settings" is OFF, please try let it ON.
This option forces RTSP to run over TCP, which can sometimes resolve similar issues with certain cameras.
| 説明: |
|
| ファイルサイズ: |
43.46 KB |
| 閲覧数: |
127 回 |

|
|
|
| トップに戻る |
|
 |
|
|
新規投稿: 不可 返信投稿: 不可 記事編集: 不可 記事削除: 不可 投票参加: 不可 このフォーラムで添付ファイルを投稿 できません このフォーラムでファイルをダウンロード できます
|
Powered by phpBB © 2001, 2005 phpBB Group
|