前のトピックを表示 :: 次のトピックを表示 |
投稿者 |
メッセージ |
APODman
登録日: 2011.01.08 記事: 34
|
日時: Tue Mar 24, 2015 1:00 am 記事の件名: Sprite Analyzer software |
|
|
Hello !
I realized to capture common sprites groups with another camera at 130km away, but I can not in any way make its triangulation in Sprite Analyzer software. It would be possible to publish a simple step by step of its use?
Thanks ! |
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12671 所在地: 139.67E 35.65N
|
日時: Tue Mar 24, 2015 7:37 am 記事の件名: Re: Sprite Analyzer software |
|
|
Hi
APODman wrote: | Hello !
I realized to capture common sprites groups with another camera at 130km away, but I can not in any way make its triangulation in Sprite Analyzer software. It would be possible to publish a simple step by step of its use?
Thanks ! |
Well....
Its outline is ...
1. Use UFOAnalyzerV2 and make accurate profile of the event on each camera.
2. By watching images of all cameras, find correspondings points of the object.
Decide measurement points of the object and their number on all peakhold image of cameras.
(Top and bottom of each column sprite will be good measurement points, if they are clearly imaged on all camera.)
(All measurement points that corresponds same position of the object should have common number among the cameras).
3. Make M*clicks.csv on each camera.
3.1 Check on "save click" check box on View sheet of UA2
3.2 click the measurement points on the View, in order of the number decided at 2..
(left click decide a position, right click will cancel the last point, the number all be shown on the view)
(There will be M*clicks.csv in the capture directory)
4. Gather all M*clicks.csv to one directory.
5. Read 4, by SpriteAnalyzerV2
See images of example below.
http://sonotaco.jp/forum/viewtopic.php?t=1572
OK?. |
|
トップに戻る |
|
|
Martin Dubs
登録日: 2014.03.04 記事: 56
|
|
トップに戻る |
|
|
SonotaCo Site Admin
登録日: 2004.08.07 記事: 12671 所在地: 139.67E 35.65N
|
日時: Tue Mar 24, 2015 8:56 am 記事の件名: |
|
|
SpriteAnalyzerV2(SA2) is below.
http://sonotaco.com/soft/index.html#sa
SA2 is a tool for easy triangulation. There is no English documentation.
Please be aware its accuracy. It depends on the resolution of a single pixel of the image and the accuracy of a mouse click on the image, so it is not so good. |
|
トップに戻る |
|
|
APODman
登録日: 2011.01.08 記事: 34
|
日時: Tue Mar 31, 2015 3:25 am 記事の件名: |
|
|
The tutorial works, thank you Sonotaco |
|
トップに戻る |
|
|
|